RITES LIMITED EASTERN REGION (QA DIVISION) (A Govt. of India Enterprise)

Testing Support

Modern Instrumental Supports

Terms & Conditions

Lab Test Rate

Spectrum of Tests That Can be Undertaken

Rubber & Plastics Testing

Polymer Identification	IS: 3400 IS :
Tensile Test, Elongation %	3400 IS : 3400
Hardness	IS: 3400 IS :
Swelling Test	3400 IS : 3400
Compression Set Test	IS : 3400 IS :
Abrasion Resistance	3400 IS : 3400
Accelerated Ageing Test	IS : 13588-93 & ASTM D2632
Specific Gravity	IS: 3400 IS: 3400 IS:
Tear Strength	3400 IS :2530 - 63
Impact Tester	IS: 1448 (Pt. 25)-76
Flexing Resistance	IS:1448
Rebound Resistance Test	IS: 1448 (Pt.20)-82
Adhesion Test	IS: 1448 (Pt.21)-92
Melting Point	IS: 1448 (Ft 66)-69
Melt Flow Index	IS: 1448 (Pt. 66)-69

Oil, Grease & Lubricant

Kinetic Viscosity	IS: 1448(Pt.25)-76
Flash Piont	IS : 1448
i) Abel	IS : 1448 (Pt.20)-82
ii) Pensky Marten	IS : 1448 (Pt.21)-92
ii) Pensky Marten	IS : 1448 (Pt.66)-69
iii) Cleveland	IS : 1448 (Pt.66)-69
Carbon Residue by Ramsbottom Method	IS: 1448(Pt.8)-67
Cloud & Pour Point	IS : 1448 (Pt.10)-70
Water & Sediments	IS : 1448 (Pt.41)-92
Copper Strip Corrosion Test	IS : 1448 (Pt.15)-76
Aniline Point	IS : 1448 (Pt.3)-84
Water Content by Distillation	IS : 1448 (Pt.40)-87
Oxidation Test	IS : 1448 (Pt.65)-86
Drop Point	IS : 1448 (Pt.52)-71
Thermal Stability of Lub Greases	IS: 1448 (Pt. 89)-79
Rush prevention	IS: 1448 (Pt.96)
Dielectric test in insulting oil	IS : 1448 (Pt.20)-82
Nutralisation no.by potentriometric titratioon includingPH,TAN,TBN	IS : 1448 (Pt.1)-71
Consistency of Grease	IS : 1448 (Pt.57)-64
Cone penetration test	IS : 1448 (Pt.60)-94
Colour by ASTM Colour Scale	IS: 1448 (Pt. 12)-67
Oxidation Stability	IS: 1448 (Pt. 94)-91
Saponification Value,Saponifiable & Unsaponifiable Matter	IS: 1448 (Pt. 55)-63

Paint & Varnish Testing

Film Thickness	IS: 101 (Pt.3)	- 89 Sec. 2
Finish	IS: 101 (Pt.3)	- 87 Sec. 4
Wet Opacity	IS: 101 (Pt.4)	-88 Sec. 1
Colour	IS: 101 (Pt.4)	- 89 Sec. 2
Gloss	1S:101 (Pt.4)	- 88 Sec. 4
Hardness Tests	IS: 101 (Pt.5)	-88 Sec. 1
Flexibility & Adhesion	IS: 101 (Pt.5)	-88 Sec. 2
Impact Resistance	IS: 101 (Pt.5)	-88 Sec. 3
Viscosity	IS: 101 (R.1)	- 89 Sec. 5
Phthalic Anhydride Test	IS: 101 (R. 8)	-93 Sec. 4
Resistance to Water 1.Liquid 2. Heat	IS: 101 (R.7, )IS: 101 (R.7, )IS: 101 (R.7)	-89 Sec. 1, - 90 Sec. 2, -90 Sec. 3
Composition	IS: 101 (R.8)	-90 Sec. 2
Acid Value	IS: 101 (R.9)	-" yo oGc. i
FlashPoint	IS: 101 (R.1)	-87 Sec. 6
* Weight in Kg/10 Lit	IS: 101 (R.1) , 354 (for Phthalic	- 87 Sec. 7 Anhydride)

Mechanical Testing: ( Ferrous & Non -ferrous Products )

Tensile, Yield & Elongation %	IS : 1608
Proof Stress	IS :1599
Bend	18:1789-61, 15:1790-61 & 13:1500-83
Brinell	IS: 1501 -84
Vickers	IS:1586-80(Pt.1)
Rockwell Hardness	18:1598-77
Izod / Charpy upto + 300° C - 60° C	18:1499-77 & IS: 1757-88
Compression Test	IS : 2328 - 83
Load Deflection Test	IS : 2335 - 85
Flattening Test on Tubes	IS : 2329 - 85
Drift Expanding Test on Metallic tubes	IS : 4748 - 88
Bend Test on Metallic tubes	13:6416-88

Metallography : (Ferrous & Non -ferrous Products)

Examination of Micro Structure of average Grain size of Metals of different Magnification upto 1000X	13:6416-88
Case Depth of Steel	IS : 6396 - 83
Decarburised Layer of Steel	13:4163-82
Inclusion content in Steel by macroscopic method	IS : 3203 - 82
Thickness of Coating	IS : 2633 - 86
Uniformity of Zn Coating	IS : 2633 - 86
Phase Distribution %	IS : 2633 - 86

Textile & Leather Products Testing

Breaking Load & Elongation	IS : 1 969 - 85
Weight Per m	IS : 1 963 - 81
Scouring Loss	15:1383-77
Dimensional Change	IS : 2977 - 89
Tear Resistance	IS : 6489 - 93
Ends & Picks	15:1671-77
Yarn Strength	IS : 3421 - 88
Chem. analysis of acrylic Textiles and Fibre	IS: 199-89
Moisture %, Ash content for Textile	IS : 3456 - 66
Water Soluble Matter of Textile	IS: 764 - 79 & IS: 765-79
Shrinkage	IS : 3361 - 79
Colour fastness to Washing	18:3417-79
Quantitative Estimation of Polyster & Cotton % in Polyster Fabric	IS:*3416-88
Water Absorption & Penetration by Bundesmann app.	IS: 392-89
Breaking load and elongation of Textile Fabrics	15:1969-85
Scouring Loss in Grey and finished Cotton Textile	13:1383-77
*Non-destructive Test*
Magnetic Particles Test for i) Casting ii) Forging to iii) Dye Penetrant	13:10724-90 IS: 7743-75 IS: 3658-81

Chemical Analysis ofSteetlron & Non-ferrous Metals and Alloys

Spectrographic Analysis comprising estimation of C. Mn, Si, 3. P. Ni, Cr, Mo, W, Cu, Ti, Nb etc. Adding up to approx. 41 elements in the following four catagories, namely:
1. Fe Base 2. Cu Base 3. Ni Base 4. Al Base

Estimation of traces of Toxic elements in effluent and

polluted water / sewage ( by U.V spectrophotometer)


Home	About us	Services	Clients	Contact us	Feedback